bluescreenerrorfix

Castor Wheel for Patio Planters

2022-01-14T12:17:05-05:00

Vendor: bluescreenerrorfix
Type: Patio Planters
Price: 2.50

Product Description

Install your planter with castor wheels and relocate by rolling the planter to any nearby space. Great for sudden inclement weather or to control sun/shade spots. Please note that the planter can be used with legs or with castor wheels. Legs and Wheels cannot be installed simultaneously.

Patio Planter Wheel Requirements

SKU#: 300001600: 15.75" x 15.75 x 45" Small Planter requires 4 castor wheels
SKU#: 300001601: 15.75" x 23.5 x 57" Medium Planter requires 5 castor wheels
SKU#: 300001602: 15.75" x 31.5 x 63" Large Planter requires 5 castor wheel
SKU#: 300001603: 15.75" x 31.5 x 58" Tower Planter requires 4 castor wheels

Materials

Wheel: Nylon Plastic & Carbon Steel (Pin)

Wheel Specifications

Wheel Capacity: up to 150 lbs.
Wheel Diameter: 1.15 inches
Wheel Width: 1.38 inches
Floor to Planter Base Distance: 0.6 inches

Parts List

1 - Castor Wheel

Stack & Extend 'Animal Barrier' with Gate - 2 Foot Wide Straight Panels

2021-07-21T10:38:26-04:00

Vendor: bluescreenerrorfix
Type: Accessories
Price: 44.99

Product Features

Connects to anchor or stacking joints in bluescreenerrorfix 2' Straight Raised Garden Beds (for other applications, stake directly into the ground)
Durable plastic and stainless-steel construction
Keeps out small to large sized animals
Gate allows for easier access than traditional animal fencing
Constructed from stainless steel uprights and heavy-duty netting
Will not harm pets or wildlife
Easy to install
1-year warranty

The 2 Foot Animal Barrier Kit

Has your garden been visited by some unwelcome critters? Chipmunks raiding your birdfeeder, deer munching on your roses, rabbits eating your lettuce? If you're looking for a way to keep the animals out of your garden, Frame it All has a great solution - the Animal Barrier kit. This customizable animal barrier fence can be added to nearly any Frame it All design, providing a sturdy barrier to keep out those pesky critters. The kit includes everything you need to build the fence, and it's easy to add on to an existing Frame it All design. So if you're tired of animals pilfering your garden harvest, give the Animal Barrier kit a try. It just might be the solution you've been looking for.

Our animal barrier kit is made with a rigid mesh netting and stainless-steel framework so you don’t have to worry about it rotting or rusting overtime. In addition to this, the kit will also come with a 4ft swinging gate section for easy access to your garden. If anything happens to your animal barrier you don’t need to worry because it comes with a 1-year warranty too!

Modular fencing system

The 2ft-animal barrier kit can be installed on any Frame it All 2ft board. If your garden design uses multiple board types, you can also connect this animal barrier kit in with our 4ft straight & curved animal barrier kits. Frame it All’s animal barrier kits are full modular with each other leaving you with endless options for garden protection. If you are looking to install an animal barrier or veggie wall onto a terraced garden design, try out our Terrace Connectors . These connectors will allow you to install these accessories across terraced sections.

If you are looking to install this animal barrier kit directly into the ground, you can do that too! Just purchase four Stacking Stakes per animal barrier kit that you are installing into the ground. The poles of our animal barrier will insert into the top of these stakes giving you a strong and durable fence.

To keep out larger animals like deer, stack our animal barrier kits 2-levels high. This will give you a 4-ft high fence that will deter nearly any animal from accessing your garden bed. Our animal barrier kits come with all the parts you need to stack them on top of each other so no ‘jimmy-rigging’ required!

Customize your own animal barrier garden

If you’re looking to create a custom garden with a complete animal barrier, try out Design it All , our 3D design app. With this tool, you can drag & drop boards to create whatever design you can think of. You can even put animal barrier sections on your design with this tool as well. And the best part is, when you finish creating your design, you can export it directly to checkout so you can feel confident that you will have all of the necessary parts to build your dream garden!

Studies have shown that deer will avoid jumping into enclosed spaces if they can help it. Although deer can jump over traditional deer fencing, if the fenced section is small enough, they will usually choose to not jump into it. By surrounding your garden with animal barrier fencing, you’ll be able to dissuade this prevalent nuisance.

Here’s a note from Anthony on why he designed this product:

“My goal with this Animal Barrier kit was to allow the user to do anything they wanted with it. Stack it higher to keep out larger animals or directly into the ground for non-raised bed gardens. By allowing the animal barrier poles to insert into our stacking stakes, we achieved a super tight animal barrier that small animals can’t crawl under. The fence is literally as close to your garden as possible because it’s attached directly onto it.” – Anthony

Kit Includes

Part #1 (2) - Corner upper hinge connector - Top
Part #2 (4) - Corner upper hinge connector - Bottom
Part #3 (1) - Upper gate hinge connector
Part #4 (1) - Upper gate sleeve connector
Part #5 (1) - Lower gate hinge connector
Part #6 (1) - Lower gate sleeve connector
Part #7 (2) - L square gate connector
Part #8 (1) - Gate latch
Part #9 (4) - Tube cap
Part #10 (30) - Zip ties
Part #11 (1) - Long netting
Part #12 (1) - Square netting
Part #13 (1) - Vertical square gate tube
Part #14 (2) - Horizontal square gate tube
Part #15 (7) - Vertical & Horizontal round tube
Part #16 (4) - Raised garden bed 2'' brown adapter snap caps, (4) Raised garden bed 1'' black adapter snap caps
Part #17 (1) - Round sleeve (Use this part only if joining 2 or more kits to extend animal barrier)

PRODUCT UPDATE > INTRODUCING NEW LENGTH!

Please note that this 2' Straight Animal Barrier Kit with integrate with our newly sized 20.75 Inch Straight Timbers. Our new length timbers will be slightly shorter and with this major update, we’re bringing more designs that will work flawlessly with the new length.

All orders shipped out after June 4th, 2021 will be of new length.

1/2" (.700 OD) Poly Drip Tubing for Drip Irrigation

2021-03-09T15:26:30-05:00

Vendor: bluescreenerrorfix
Type: Accessories
Price: 12.99

1/2" (.700 OD) Poly Drip Tubing

DIG’s premium quality 1/2" (.600 ID X .700 OD) poly drip tubing is available in lengths of 50'. The poly drip tubing is commonly referred to as drip irrigation tubing, blank tubing or distribution tubing. PE tubing or drip hose, is used as the primary drip irrigation installation supply line, into which micro tubing, drip emitters, drip line or micro sprinklers are attached to deliver water to the plant areas. DIG’s durable drip irrigation tubing is made with low-density polyethylene resin material with a minimum of 2%+ Carbon Black for extra resistance to the damaging effects of ultraviolet rays. DIG poly drip tubing exhibits a combination of outstanding environmental stress-cracking resistance and burst strength to meet every demand of drip irrigation system installations above or below grade.

Features

Available in 50'
Contains a minimum of 2% concentrated carbon black resin antioxidant to protect the poly drip tubing from thermal degradation
The poly drip tubing made with premium low density polyethylene resin exhibits a combination of outstanding environmental stress-cracking resistance and burst strength
Use with our wide range of 1/2" compression fittings with .700 OD
The poly drip tubing can meet any demand for above and below grade micro irrigation systems for gardening, landscape and agricultural installations
Can be used with other manufacturers’ brands of the same size of outside diameter tubing
Available in black color
DIG poly drip tubing and micro tubing are made in the USA

Product specifications

Operating pressure: up to 60 PSI
Bending radius: 10"
Color: black
Size: 1/2" .600 ID x .700 OD (.50 wall thickness)
Material: low-density polyethylene with a minimum of 2% carbon black

Drip tubing friction loss chart in PSI per 100'

c3 Flow	cx	c2 1/2 in. with .520 ID	cx	c2 1/2 in. with .600 ID	cx	c2 1/2 in. with .620 ID	cx	cx
GPM	GPH	L/H	velocity f/s	head loss in PSI	velocity f/s	head loss in PSI	velocity f/s	head loss in PSI
.50	30	113.6	.76	.32	.57	.2	.53	.1
.75	45	170.3	1.13	.7	.85	.3	.8	.3
1.0	60	227.1	1.51	1.2	1.14	.6	1.06	.5
2.0	120	454.2	3.02	4.2	2.27	2.1	2.13	1.8
2.25	135	511	3.4	5.2	2.55	2.6	2.39	2.2
2.50	150	567.8	3.78	6.4	2.84	3.2	2.66	2.7
3.0	180	681.4	4.53	8.9	3.41	4.4	3.19	3.8
3.25	195	738.2	4.91	10.3	3.69	5.2	3.46	4.4
3.50	210	794.9	5.29	11.9	3.97	5.9	3.72	5.0
4.0	240	908.5	6.05	15.2	4.54	7.6	4.25	6.5
4.50	270	1022.1	N/R	N/R	5.11	9.4	4.78	8.0
5.0	300	1135.6	N/R	N/R	5.68	11.4	5.32	9.8
5.50	330	1249.2	N/R	N/R	6.24	13.6	5.85	11.6
5.0	360	1362.7	N/R	N/R	N/R	N/R	N/R	N/R

About DIG Poly Drip Tubing

DIG .700 OD poly drip tubing is generally is used as the main lateral or the supply line to deliver water to the plant area in a drip irrigation system installation in commercial, residential or agricultural applications. The poly drip tubing may be installed above the ground and covered with mulch to blend with the landscape, or below grade.

DIG .700 OD poly drip tubing is available in 100', 200’, 500’ and 1000' and it is manufactured with Dow 7510 low density polyethylene resin and includes 2%+ Carbon Black for extra resistance to ultraviolet rays. DIG’s premium poly drip tubing dimension is .600 ID x .700 OD, a universally accepted size used in drip irrigation installations. The poly drip irrigation tubing size can vary by manufacturer, with some having larger or smaller ID and OD, and each size may display different flow characteristics.

Poly Drip Tubing Installation Notes:

Before you start, we highly recommend that you make a sketch of the garden or site with a detailed layout, mapping out the location of the poly drip tubing and micro tubing, the length of the drip tubing and the watering devices selected. This will make it easier to maintain the system at each new season or when expanding.
Before unrolling the poly drip tubing from the inside or outside, depending on the type of coil used, leave it out in direct sunlight to warm it up. This will make it easier to work with.
If the poly drip tubing is used in a below grade installation, we suggest digging a six to eight inch deep trench, to keep the poly drip tubing at a safe distance from cultivation practices. Leave the end of the poly drip tubing above the surface for periodic flushing.
Last, we recommend not to exceed a total flow rate of 220 gallons per hour (3.6 GPM) on a single layout of drip irrigation tubing lateral.

Poly Drip Tubing Installation Steps:

Using the poly drip tubing as a main lateral or as a sub lateral: Lay out the poly drip tubing per the sketch made. Secure the poly drip tubing to the ground using one of DIG’s stakes (pack of 1, model R60, pack of 10 R60-10, pack of 10, R62B) in key areas and add more stakes as you unroll the poly drip tubing. Add stakes every 6' - 10' and at the end of each section, or as needed. Extend additional drip irrigation tubing to the plant area. Several sections of poly drip tubing can be laid out through the site, leaving all ends open for flushing. An extra 1% of poly drip tubing length should be added to each lateral to compensate for contraction at low temperatures.
Throughout the installation and per your sketch layout, add the black insert compression fittings if needed, such as tees (model C35) and elbows (model C36), leaving the end of the tubing open. To install the compression drip fittings, cut the tubing with a hand pruner, being careful to keep dirt from entering the line. Hold the drip fitting in one hand and the poly drip tubing in the other and force the drip tubing into the compression drip fitting by wiggling it from side to side.
When completing the drip tubing layout task and before installing the drip emitters or micro sprinklers, turn the water on to flush the drip tubing. After flushing the line, close all the outlets of the drip tubing using the hose end cap (model Q58) or figure eight hose end (model F68B).
The drip emitters are installed along the poly drip tubing at varying or at specific intervals. The distribution uniformity of water flow from the drip emitters along the poly drip tubing line will depend on the incoming pressure, number of drip emitters used per lateral, and the total length of the drip tubing used. It is very important to ensure high uniformity of water along the poly drip tubing by not exceeding our total flow recommendations (see Product Specifications).

B09D Digital Hose End Timer for Drip Irrigation

2021-03-09T15:26:30-05:00

Vendor: bluescreenerrorfix
Type: Accessories
Price: 49.99

B09D Digital Hose End Timer

The B09D 3/4” Digital Hose End Timer, one in DIG's newest range of hose end timers, offers simplified programming and improved monitoring of battery power with less current, resulting in longer battery life and a more reliable operation. With higher flow rates at lower inlet pressures and a range of programming features, the B09D delivers a reliable and cost-effective solution for residential use. The timer has four start times per day with durations from 1 minute to 12 hours 59 minutes in an operating flow range of .5 to 6.3 gallons per minute, allowing use in a wide range of applications including drip irrigation or micro sprinkler systems connected to a garden hose or faucet/spigot. It uses one 9-volt alkaline battery that can last for over a year.
Features

Programming options
- Watering duration from 1 minute up to 12 hours and 59 minutes
- Duration can be set in one minute increments
- Watering frequency: can be programmed in a seven-day watering calendar
  - In weekly schedule the controller can be programmed to operate on any days of the week such as Monday, Wednesday, and Friday.
  - In weekly schedule the controller can be programed with up to four start times per day.

Product Specifications
- Operating pressure 10 PSI to 80 PSI (0.6 – 5.5 Bar)
- Flow rate up to 6.3 gpm at 30 PSI (24 L/PM at 2 Bar)
- Temperature range: 40°F to 125° F (3° C to 50° C)
- Power source: 9-volt alkaline battery (not included)
- Solenoid: durable electric motor
- Power consumption: 20 micro amps in standby mode
- Materials: body ABS, and inner parts of high-impact plastic
- Dimensions: 6” D X 4” W x 6.5” H ( 15.2 cm X 10.0 cm X 16.2 cm)

Instruction Manual

About B09D Digital Hose End Timer

TheB09D Digital Hose End Timer has a 3/4” swivel female hose inlet and outlet with male hose thread so it can be attached into a garden hose or faucet/spigot. Our suggestion is to install the timer above ground to any hose thread connection. The timer uses six programming buttons. The left button is used only for On mode, the button on the right is used only for Off mode, and the four buttons in the center are used to program the unit.

Battery

This hose end timer requires one 9-volt battery (alkaline battery recommended).
1. To install the battery, use firm pressure to lift the battery compartment cover in the back of the unit.
2. Insert a new 9-volt battery and lock down the battery in place. The polarity is marked for direction.
3. Replace battery compartment cover in its proper place, ensuring a triangle is formed on the underside of the timer.
Review the instruction manual included with the unit for details.

Installation into a faucet
1. If installation is into a faucet, connect the swivel female hose thread to the faucet using the swivel adapter.
2. OPTIONAL: If the timer is installed with a drip irrigation system, make sure to add a 25 or 30 PSI pressure regulator after the timer to lower the pressure to the drip system, then install a 150 or higher mesh screen filter to protect the drip system, following with a swivel adapter to the drip tubing.
3. After the timer has been programmed, turn the faucet on and test the timer by pressing the On button once to see the timer open and press the Off button to see it close. No other steps are needed.

BOHE-BT Bluetooth® Hose End Timer for Drip Irrigation

2021-03-09T15:26:29-05:00

Vendor: bluescreenerrorfix
Type: Accessories
Price: 59.99

BOHE-BT Bluetooth® Hose End Timer

DIG's BOHE-BT Bluetooth Hose End Timer (tap timer) features Bluetooth Low Energy wireless technology combined with a full-function and waterproof timer to provide long-lasting, reliable irrigation control via your smartphone or tablet. Download DIG’s free DIG BTT app to control any number of DIG Bluetooth hose end timers and controllers through supported Android or iPhone smart devices from up to 50 feet (15 meters), line of sight.

The timer's rugged and waterproof (IP 64) design is ideal for use in residential home garden applications or where AC power is unavailable. It can operate for up to one year on two AA alkaline batteries.

Features

Operates with any supported Android or iPhone smart device
Instant communication with smartphone once connected
Programmed entirely using accompanying smartphone app
FCC and EC certified Bluetooth enabled
Easy to set up, install and operate:
- Simply install two AA batteries into the waterproof timer’s battery compartment. Download DIG’s BTT free app to your smartphone, then connect and control any number of DIG’s Single Button Smart Bluetooth Timers from the palm of your hand.
Available in the following languages, English, Spanish, Italian, Greek, French, Portuguese, Hebrew, Russian and Chinese Simplified (with more to come) (with more to come)
Bluetooth communication range: up to 50 feet (15 m)
Non-volatile memory retains program and timer integrity (excluding time)
Manual irrigation cycle can be performed via the app, or the timer’s manual program button or via the solenoid
Semi-automatic, automatic or manual operation
Available with 3/4” with FHT or BSP thread
Latching solenoid with encapsulated plunger for reliable operation
Completely waterproof (IP64) - can operate in harsh environments
Environmentally friendly; utilizes RoHS compliant components
One button to reset the timer to factory defaults or to run manually without a smartphone
Battery life up to one year
Three-year warranty

Specifications
- Type: DC latch
- Waterproof: IP64 certified
- Connection and program mode: Android or iPhone smartphone, Bluetooth®
- Controller power input: constant 11-volt
- Operation interface: one button for reset and manual run
- Power source: two AA alkaline batteries (not included)
- Solenoid with enclosed plunger: two-way magnetic latching, normally closed, 7-12 Volt DC with two wire
- Operating pressure: 10 to 120 PSI (.7 to 8.3 bar)
- Flow range: up to 14.2 GPM (up to 53 L/H)
- Temperature range: 38-130°F (3-54°C)
- Inlet and outlet: female hose thread (FHT x MHT) or British standard thread (FBSP X MBSP)
- Materials:
  - Timer housing: high-impact plastic
  - Inline valve and solenoid: glass reinforced nylon
- Weight without the box: .430 lb
- Dimensions: 5.5” Height X 4.3” Width X 3.125” Depth
- Weight with the box: .530 lb
- Dimensions: 5.125” Height X 4.37” Width X 2.875” Depth
Programming features via smartphone
- Graphical representation of programming schedule
- Weekly, Even/Odd days of the month, or 1 to 30-day schedules
- Five start times per day
- Program run time from 1 minute up to 11 hours and 59 minutes in 1-minute increments
Instruction Manual

About BOHE-BT Bluetooth® Hose End Timer

DIG BOHE-BT & BOHE-BTI hose end timers are the easiest Bluetooth® hose end timers to set up. After you purchased the hose end timer, visit the App Store or Goggle Play and download the DIG BTT app.
1. Open the battery compartment cap by turning it counter-clockwise.
2. Install two, fresh, brand name, AA alkaline batteries (alkaline battery recommended not included) and note the proper direction of the positive and negative orientation on the underside of the timer.
3. Insert and screw the battery cap clockwise. Make sure to firmly tighten the cover, by hand only.
4. Thread the timer swivel inlet female thread to the outlet faucet/ spigot or tap by turning it clockwise until hand tight. Attached your drip system or hose garden to the outlet side, hand tight only. Test it using the app’s manual run to ensure that is working properly.

Hose End Timer Setting

View remaining battery life, connection strength, timer current watering status, and last watered information easily from the app
System activation feature
Rain delay option of up to 99 days with automatic restart for water conservation
Budgeting by month of up to 200% in 5% increments
Up to nine scheduled off dates per year (preventing the controller from operating on those specific days)
Up to 12 months of irrigation run time history information in the palm of your hand
Customization through smartphone to name the controller
Customization through the smartphone Assigning a picture to a controller using the camera
Password protection capabilities

Manual run

Manual run with customization duration

Controller Scanning Screen

View previous connection information of all timers previously connected to, if you have more than one
Contact information to DIG

After installing the batteries, tap on DIG BTT app to open it. The Controller/timer screen overview will appear with SCANNING (Show the scan icon near it). Review all screens diagrams detailed features.

Quick to connect. Simple to program. Easy to operate.

The DIG BTT app has all the features you need for your irrigation timers or controllers. Spend less time on programming, reviewing, and tracking with DIG’s FCC and EC certified, Bluetooth-enabled, hose end timers and single station controllers.
Review the instruction manual included with the unit for details.

Faucet Installation

If installation is into a faucet, connect the swivel female hose thread into the faucet using the swivel adapter.
OPTIONAL: If the timer is installed with a drip irrigation system, make sure to add a 25 or 30 PSI pressure regulator after the timer to lower the pressure to the drip system, then install a 150 or higher mesh screen filter to protect the drip system, following with a ¾” swivel adapter to the drip tubing.

EVO 100 Waterproof Solar Powered Digital Hose End Timer (Tap Timer) for Drip Irrigation

2021-03-09T15:26:28-05:00

Vendor: bluescreenerrorfix
Type: Accessories
Price: 64.99

EVO 100 Waterproof Solar Powered Digital Hose End Timer (Tap Timer)

DIG's EVO100 is a Hose End Tap Timer with a 3/4” female thread inlet and male thread outlet. Power is derived via a patented, time-tested internal photovoltaic module and microelectronic energy management system that is fueled by the surrounding ambient light (solar). After being charged, this efficient energy system provides enough power for the timer to function at any time, night or day, and in any weather with no direct sunlight required. This energy system also makes the timer environmentally friendly, functioning only on clean renewable solar power without the need for a backup battery or AC power.

The EVO100 features a large, easy-to-read LCD screen and simple icon-based programming with weekly or cyclical programs, four start times per day, durations of up to six hours, program delay of up to 99 days, system off, manual operation, and a sensor wire connection to accept a rain sensor.

Features
- Powered by a patented, time-tested internal photovoltaic module and microelectronic energy management system fueled by ambient light (solar)
- Easy to install and program
- Watering flexibility with a selection of watering frequencies and four start times per day
- Seven buttons and an integrated large, high resolution screen
- Easy-to-read LCD display with an AM/PM clock and icon-based programming for easy navigation
- Blinking notification on days the hose end timer is active
- 12- or 24-hour time format
- Non-volatile memory retains program integrity (excluding time)
- Manual irrigation cycle can be performed via the manual program button
- Quick-release faucet swivel adapter for easy programming, installation and removal.
- One button program off for easy irrigation suspension
- Energy conservation feature automatically turns the hose end timer screen off after 15 minutes
- Power level meter indicates the approximate charge (energy available)
- Semi-automatic, automatic or manual operation
- High flow diaphragm valve with DC solenoid available in 3/4" FHT inlet with screen and MHT outlet, or BSP thread
- Easy rain sensor installation through external wire
- Waterproof construction ensures reliable operation in harsh environments
- Environmentally friendly and energy independent; utilizes RoHS compliant components
- Three year warranty

Product specifications

Type: DC latch
Waterproof: IP64 certified
Operating pressure: 10 to 100 PSI (.7 to 6.8 bar)
Flow range: .1 to 8 GPM (.38 to 30 L/H)
Temperature range: 38-130°F (3-54°C)
Connection: female hose thread inlet (FHT) x male hose thread outlet (MHT) or British standard thread for tap (BSP)
Power source: ambient light (solar)
Sensor connection: yellow wire for closed contact rain sensor
Power source: Ambient light (PVM)
Input: 3,000 - 100,000+ LUX
Sensor connection: yellow wire for closed contact sensor
Controller dimensions: 5.75” W x 6.76” H x 2.25” D (14.6 cm W x 17.1 cm H x 6.3 cm D)
Unit Weight including plastic clam shell packaging: 1.02 pounds (.47 kg)
UPC code: 840620100038
Materials:
- Timer housing: high impact plastic
- Inlet valve and solenoid: glass reinforced nylon with stainless steel plunger and spring

Programming options

Watering duration: one minute up to five hours and 59 minutes set in one minute increments
Watering frequency: weekly or cyclical schedule with odd days, even days, or intervals from one to thirty (1- 30) days utilizing 365 day yearly calendar with leap year.
- In the weekly schedule, the hose end timer (tap timer) can be programmed to operate on any day of the week, such as Monday, Wednesday, and Friday.
- In the cyclical schedule, the hose end timer can be programmed to operate on odd days, even days, or at specific intervals such as every three days.
Up to four start times per day in weekly or cyclical schedule provides added flexibility for any type of watering application.
Rain off/delay option with automatic restart up to 99 days
Program off option stops program until reactivated
Manual cycle via the program with automatic shutoff option

Instruction Manual

About EVO100 Waterproof Solar Powered Digital Hose End Timer

The EVO 100 is a single zone hose end electronic irrigation timer that is easy to install and program. The patented energy management system derives power only from ambient light which is collected by a small built in photovoltaic module. This energy is then stored in long-life super capacitors. There are no batteries to install or replace, and no external power supply is required. The timer has a quick-release swivel female hose thread inlet fitting and a male hose thread outlet.

Before you start programming, the timer will need to be charged for one to two hours in sunlight to get up to full power. Once it’s full though, as long as it gets around 10 minutes of ambient light per day, it will stay at full charge.

The EVO 100 is a light-powered maintenance-free timer with no batteries to replace or charge.

Installation

1. Install the timer to the faucet by turning the female inlet fitting clockwise until hand tight. The female inlet has a screen washer so, do not use any wrench to tight the unit . For BSP thread models wrap TEFLON tape on each of the male thread fittings used.
2. Turn the water supply on. The timer will open momentarily and then will shut off. Note: If it does not, push the manual operation button twice to ensure that the timer is closed.
3. If the timer is installed with a drip irrigation system, make sure to install a 150 mesh or higher screen filter to protect the drip system, then add a 15, 25, or 30 PSI (1, 1.75, or 2.1 bar) pressure regulator, followed with a swivel adapter to the drip tubing.
4. Test the timer using the manual operation button located below the display. Press the button to open and start water flow. If connected to a sprinkler or drip system, check that the system is working to your satisfaction and that there are no leaks. Press the button again to turn off the unit.
5. Program the timer.
Review the instruction manual included with the unit for details.

If a rain sensor or other closed contact sensor is used, cut the yellow wires and add the sensor per the manual, sensor instructions, making sure to use a waterproof wire connection.

Raised Bed Drip Irrigation Kit

2021-03-09T15:26:28-05:00

Vendor: bluescreenerrorfix
Type: Accessories
Price: 49.99

The DIG Raised Bed Drip Kit is specially designed to water planter boxes or vegetable gardens planted in rows. The kit contains 50’ of 1/4” dripline with .52 GPH @ 15 PSI or .65 GPH @ 25 PSI drip emitters every 9”, providing up to five lines, with each line up to 10' long (up to 150 sq. ft). The kit can be expanded to cover more than 700 sq. ft. using up to five kits together or expanding the kit using additional 1/2” drip tubing as the supply line, along with additional 1/4” drip line. The kit includes a 3/4" backflow preventer, 3/4" 25 PSI pressure regulator, 3/4" swivel adapter, 50' of our premium 1/2" drip tubing with .600 ID x .700 OD and all the necessary parts to complete the installation.

Perfect for planter boxes or vegetable garden in-ground installations
Complete kit; covers up to 150 sq ft (can be easily expanded)
Contains 50' of 1/4" drip line with .52 GPH pre inserted drip emitters every 9"
Applies water at a very low application rate leading to less surface evaporation from leaves and soil
Offers flexibility in irrigation frequency and application rate, minimizing surface compacting and runoff
Easy to install
No tools required

Raised Bed Drop Kit Part List

1- 3/4" FHT x MHT backflow preventer
1- 3/4" FHT x MHT preset pressure regulator
1- 3/4" FHT swivel adapter
1- 50' of 1/2" poly tubing
1- 50' of 1/4" dripline with 9" drip emitter spacing
1- 1/2" coupling
3- 1/2" tees
8- 1/2" elbows
4- 1/2" tubing holder stakes
10- 1/4" tubing holder stakes
15- 1/4" 1/4" barbs
10- goof plugs
1- hole punch
4- figure "8" hose ends
1- Instruction manual

Instruction Manual

Product Specifications

Maximum incoming operating pressure: 100 PSI
Recommenced operating pressure: 25 PSI (25 PSI pressure regulator included)
Maximum recommended flow rate: 220 GPH (3.7 GPM)
Maximum recommended distance for 9" spacing: 28' (8.5 m)
Drip poly tubing length & size: 50' x 1/2" with .600 ID x .700 OD
Drip line length & size: 50' x 1/4" with .170 ID x .240 OD
3/4" FHT x MHT pressure regulator: downstream pressure preset to 25 PSI
PC drip emitter flow rates: .52 GPH @ 15 PSI and .65 GPH @ 25 PSI)
Total flow rate for this kit: 36 GPH (.61 GPM)

About the Raised Bed Drip Kit

DIG Raised Bed Drip Kit is specially designed to water planter boxes or vegetable gardens planted in rows. The kit contains 50’ of 1/4” dripline with .52 GPH @ 15 PSI or .65 GPH @ 25 PSI drip emitters every 9”, providing up to five lines, with each line up to 10' long (up to 150 sq. ft). The kit can be expanded to cover more than 700 sq. ft. using up to five kits together or expanding the kit using additional 1/2” drip tubing as the supply line, along with additional 1/4” drip line. The kit includes a 3/4" backflow preventer, 3/4" 25 PSI pressure regulator, 3/4" swivel adapter, 50' of our premium 1/2" drip tubing with .600 ID x .700 OD and all the necessary parts to complete the installation.

Start the kit from a faucet or garden hose

1. First review the area to be irrigated and then make a drawing of the garden or site with your preferred layout.

2. To automate the system, install one of DIG's hose end timers (not included) after the backflow device.

3. In the installation stage, to the faucet, first connect the backflow device, then the pressure regulator and then the 3/4" swivel adapter with the 60 mesh screen. If water quality is a concern, we highly recommend using a fine mesh 3/4" filter with 155 mesh (model D57A), not included with this kit.

4. Lay out the 1/2" drip tubing per your drawing and along each planter.

5. Near the corner of each planter cut the 1/2” drip tubing and connect a 1/2" tee. To the tee, connect an additional length of 1/2" drip tubing and raise the drip tubing to the top of the planter. To install the 1/2" compression fittings, cut the drip tubing with a hand pruner, being careful to keep dirt from entering the line. Hold the compression fitting in one hand and the drip tubing in the other and force the drip tubing into the fitting by wiggling it from side to side. Make sure that the drip tubing is pushed into the compression fitting for about 1/2" to 5/8" for a very tight fit. No glue or clamps are required.

6. To the end of the drip tubing, connect a 1/2" elbow and to the 1/2" elbow, connect a short length of 1/2" drip tubing. Lay out the 1/2” drip tubing perpendicular to the planter’s rows and to end of the planter. This is the main water supply line for each planter.

3/4" FHT x MHT pressure regulator: downstream pressure preset to 25 PSI

7. Near each row, punch a hole into the side of the 1/2" drip tubing and insert a 1/4" barb.

8. To the 1/4” barb, connect the 1/4” drip line with drip emitters every 9” and lay out the 1/4" drip line beside the plant rows a few inches past the last plant in each row to compensate for temperature changes that may affect the length of the drip tubing. Do not extend the drip line beyond the recommended layout of 28' in length

9. Secure the 1/4” drip line, using the 1/4" stakes included.

10. Turn the faucet on and flush the line for a few minutes to clean all debris that may be trapped inside the drip tubing or the drip line. Then shut off the faucet and close the end of the 1/2” drip tubing using the 1/2” hose end and the 1/4” plugs included with the kit.

11. Pressurize the system again and make sure that the system is working correctly and no leak appears.

Note: To expand the kit we highly recommend continuing with the same model drip line. Review the instruction manual included with the kit for complete details.

Using drip irrigation, water first thing in the morning before the temperature begins to rise. This will allow excess moisture on the leaves and top soil to dry before fungal and other diseases can develop. The most common cause of early plant death is over watering. Using drip irrigation can help sustain healthy plants by applying water directly to the plant root zone when and where it is needed. For established plantings, deep, infrequent watering is recommended. In most cases deep watering will encourage deeper rooting, which leads to stronger, healthier plants.

About the soil and suggested drip emitter spacing:

Sandy soil or light textured soil: Water percolates straight through before it can spread far enough horizontally, so use the drip emitters in close spacing of 10" to 12" apart. Apply water at close intervals such as every other day for 20 to 90 minutes depending on plant size and type, daylight conditions (full sun, partial sun or shaded) and weather pattern (cold to hot) with the plants under full sun in hot conditions getting the longer period.

Loamy soil or medium textured soil: This is the ideal soil condition with water moving slowly and spreading evenly, so use the drip emitters spaced 16" to 18" apart. Apply water at wider intervals such as every two to four days for 15 to 90 minutes depending on plant size, type, daylight conditions (full sun, partial sun or shaded) and weather pattern (cold to hot) with the plants under full sun in hot conditions getting the longer period.

Clay soil or heavy textured soil: Water is absorbed very slowly, so install the drip emitters at a spacing of 18" to 24" apart. Apply water at longer intervals such as every three to five days for 30 minutes to 60 minutes depending on flow rate, plant size and type, daylight conditions (full sun, partial sun or shaded) and weather pattern (cold to hot) with the plants under full sun in hot condition getting the longer period.

Stack & Extend 'Animal Barrier' with Gate - 4 Foot Wide Curved Panels

2021-01-27T16:45:18-05:00

Vendor: bluescreenerrorfix
Type: Accessories
Price: 64.99

Product Features

Connects to anchor or stacking joints in bluescreenerrorfix 4' Curved Raised Garden Beds (for other applications, stake directly into the ground)
Durable plastic and stainless-steel construction
Keeps out small to large sized animals
Gate allows for easier access than traditional animal fencing
Constructed from stainless steel uprights and heavy-duty netting
Will not harm pets or wildlife
Integrates with bluescreenerrorfix 4' Curved Veggie Wall
Easy to install
1-year warranty

The Curved Animal Barrier Kit

Growing your own fruits, vegetables, and herbs can be a rewarding experience. But it can also be frustrating if you have to constantly contend with animals pilfering your hard-earned harvest. If you're looking for a way to keep critters out of your garden, Frame it All's Animal Barrier kit is a great option. This customizable fence can be fitted onto nearly any Frame it All design, making it easy to create a space that's both aesthetically pleasing and functional. The barrier is made from powder-coated steel, so it's tough enough to withstand repeated use. Plus, it's easy to set up and take down, so you can adjust the size of your barrier as needed. Whether you're dealing with pesky rabbits or gophers, the bluescreenerrorfix Animal Barrier kit is an effective way to protect your garden.

The rigid mesh netting will deter animals, while the stainless-steel framework ensures that it will hold up against even the most determined pests. Each kit comes with a 4ft gate section, so you don’t have to bend over uncomfortably to access your garden bed. Plus, it comes with a 1-year guarantee for added peace of mind. So why wait? Get this animal barrier today and keep your garden or yard looking great.

Install on Terraced gardens or in-ground

Our curved animal barrier kit can be installed over any Frame it All curved board and can connect to our straight 4ft & 2ft animal barrier kit too! Each of these kits will have a fence section that stands 2ft on top of the height of your raised garden bed. By combining multiple kits you can fence off nearly any garden design you can think of. If you’re assembling on a terraced design, use our Terrace Connectors to connect the animal barrier across joints of different heights.

Our animal barrier kits can also be installed directly into the ground if don’t have a Frame it All raised garden bed kit. For the firmest ground connection, we recommend you use our Stacking Stakes in combination with the animal barrier poles. The poles of our animal barrier kits are designed to insert into the top of our stacking stakes allowing you to have a more stable ground connection for your fencing sections.

If you’ve been having issues with deer getting to your garden then you may be looking for a taller fence. Well you’re just in luck! The Frame it All Animal barrier kit can stack on top of itself to reach a 4ft fence height. The gate sections can also stack on top of each other so you can still access your garden without having to crouch through a small fence opening.

Design it All

If you’re not sure how many animal barrier kits are required for your garden bed design, we recommend you try out our 3D design app, Design it All . This tool will allow you to build your garden right on your computer and then drag and drop animal barrier sections onto. Once you’ve fully surrounded your garden you can send the complete part list to checkout to purchase your complete animal barrier.

Many deer experts agree on the notion that deer will not jump over a fence if the area inside is too small. When they can help it, deer will avoid jumping into enclosed spaces. What this means is that by surrounding your garden with fence section directly around the perimeter, deer will be deterred from jumping over and into it.

Here’s a note from Anthony on why he designed this product:

“With the addition of our curved animal barrier kit, the Frame it All fencing system is now completely modular! We have an animal barrier kit for any board shape and size and the best part is they are all modular with each other! Now you can protect beautiful curved designs like the Versailles Sunburst or Roundabout!” – Anthony

Kit Includes

Part #1 (2) - Corner upper hinge L-connector - Top
Part #2 (4) - Corner upper hinge T-connector - Bottom
Part #3 (1) - Upper gate hinge connector - Top
Part #4 (1) - Upper gate hinge connector - Bottom
Part #5 (2) - Upper gate hinge connector - Sleeve
Part #6 (1) - Lower gate hinge connector - Top
Part #7 (1) - Lower gate hinge connector - Bottom
Part #8 (1) - Lower gate hinge connector - Sleeve
Part #9 (4) - L square connector
Part #10 (1) - Gate latch
Part #11 (2) - Gate stopper screw
Part #12 (1) - Gate stopper
Part #13 (4) - Tube cap
Part #14 (50) - Zip ties
Part #15 (1) - Long netting
Part #16 (2) - Square netting
Part #17 (2) - Vertical square gate tube
Part #18 (4) - Horizontal square gate tube
Part #19 (3) - Upright horizontal tube
Part #20 (4) - Vertical round tube
Part #21 (4) - Raised garden bed 2'' brown adapter snap caps, (4) Raised garden bed 1'' black adapter snap caps
Part #22 (1) - Round sleeve (Use this part only if joining 2 or more kits to extend animal barrier)

Stack & Extend 'Veggie Wall' - 4 Foot Wide Curved Panels

2021-01-19T13:18:25-05:00

Vendor: bluescreenerrorfix
Type: Accessories
Price: 54.99

Product Features

Durable stainless-steel and nylon construction.
Elevated design allows easier plant care with less bending.
Increases airflow to reduce the chance of disease and increases access to sunlight for faster growth.
Connects to anchor or stacking joints in bluescreenerrorfix 4' Curved Raised Garden Beds. For other applications, stake directly into the ground.
Integrates with bluescreenerrorfix 4' Curved Animal Barrier
Stackable and Extendable
One-year warranty

The Curved Veggie Wall kit

Extend your growing space vertically with a Curved Veggie Wall Kit. This trellis kit comes with everything you need to setup a Veggie Wall on any Raised Garden Bed or directly into the ground! Allow your tomato and eggplants to grow higher with additional support or grow vining crops such as snap peas, cucumbers, and bitter melon!

Our Veggie Wall Kit is composed of a sturdy stainless-steel framework and strong nylon mesh netting. Support the development of large fruits such as beef-steak tomatoes or cucumbers. And with its elevated height, the Veggie Wall will require no bending while harvesting!

A single Veggie Wall kit will provide 48 vertical square feet of growing area for your vines to climb. Each kit will come with two panels that will cover the vertical space over two curved composite boards. You can also stack a veggie wall on top of our animal barrier kit to have the best of both worlds!

Try out the Veggie Wall as a privacy screening too! Each kit comes with stacking stakes for in-ground installation so you can create a wall of vines to create a living fence section. There are several fast-growing vine plants that would be perfect for this application such as morning glory, clematis, or scarlet runner bean.

Easier and more efficient watering

Vertical growing crops are also much easier to water because the root systems are contained within a smaller area and less water gets caught on leaves. Keep water off of your vegetables is an important practice to stop rot and disease; powdery mildew to name one. When your growing season is over, disassembly is easy too! Just remove the poles from the stacking stakes and fold over your veggie wall.

Our Veggie Wall kit is fully modular with all of our Frame it All composite boards and animal barrier kit. You can even connect a straight and curved Veggie Wall together. This gives you the option to trellis garden on any Frame it All garden bed! Terrace Connectors will allow you to even install on a terraced garden design.

HERE’S A NOTE FROM ANTHONY ON WHY HE DESIGNED THIS PRODUCT:

“With the addition of the Curved Veggie Wall kit, you can now install a trellis onto nearly any Frame it All garden bed! Now you can surround beautiful, curved gardens like the Colosseum or Wavy Navy with a lush wall of vegetation.” - Anthony Topping

Kit Includes

2 - Curved 4 Foot Long Panels x 6 Foot Height
Frame, Netting and All Connectors
Above parts as listed in the Product Manual
RAISED BED NOT INCLUDED

Terrace Connector: Connects Veggie Wall/Animal Barrier for Terraced Gardens - 2 Pack

2021-01-06T13:58:46-05:00

Vendor: bluescreenerrorfix
Type: Accessories
Price: 9.99

Product Features

Steel construction and a corrosion resistant black e-coating. This means your build is better protected.
Integrates with bluescreenerrorfix's Animal Barrier and Veggie Wall
Easy to install
1-year warranty

Product Description

The bluescreenerrorfix ‘Terrace Connector' is used to connect the framework of Animal Barriers and/or Veggie Walls located onto Terraced Raised Garden Beds; which are a series of connected beds each one taller and deeper than the one alongside it.

To protect your hard won produce from being decimated by garden pests, mount an Animal Barrier onto each of the raised beds. Even though each section of framework is at a different height to the next you can easily connect them with our Terrace Connector.

A Veggie Wall doubles the growing area of a terraced raised garden, enabling you to grow vertically. If you attach a Veggie Wall atop an Animal Barrier you further increase your vertical growing area and also protect your mature garden produce from marauding garden pests.

The Terrace Connector attaches to the framework of a section of an Animal Barrier or Veggie Wall then securely clamps onto the framework of the adjacent section to ensure a strong, durable connection.

Innovation from bluescreenerrorfix

Includes:

Terrace Connector consists of two mirrored pieces that interlock together with a puzzle piece design. The two pieces clamp together with one nut and bolt.
You will receive 4 pieces to assemble 2 Terrace Connectors. (2-Pack)

The ‘Worm It All’ Worm Composter Bin - 11” x 11” x 12.6” Composting Box (Soil Enrichment)

2020-09-11T10:43:41-04:00

Vendor: bluescreenerrorfix
Type: Accessories
Price: 27.99

Introducing The 'Worm It All' Worm Composter

Our worm composter box is the perfect size for small-scale in-ground composting treatments. This handy 11" x 11" x 12.6" worm compost box can hold a super mix of organic bedding materials and vegetable scraps to create the perfect soil enrichment for your plants and flowers.

This Worm It All comes fully assembled, with no additional tools required. Consisting of 100% recycled plastic with side panels containing convenient worm access holes, it's a stylish yet minimalistic addition to your raised garden bed.

The worm composter makes it easy to compost and boost your gardening experience. Our bins give worms the space they need to break down scraps and create valuable compost that you can easily access anytime for your garden.

Build a Worm Compost Bin System Right in Your Garden!

This worm composter box is designed to efficiently compost and transform your kitchen scraps into nutrient-rich, earth-friendly fertilizer. If you’re looking for an easy way to integrate vermicomposting and worm castings into your garden (without the DIY!), then this is great for you.

The unique design allows easy access to waste from the top of the unit when needed. Simply remove the top cover to add organic matter or remove food waste for use in your garden. Then, the worms do what they do best and make valuable compost for your garden.

Quick and Mess-Free

This ready-to-use worm box is quick and mess-free. It allows you to turn your kitchen waste into valuable compost in just four weeks.

The holes on this composting worm bin are essential for letting worms in and out quickly so that they can release their worm castings into the soil for better composting. In addition, the aerated underground side-panel design on these compost bins reduces odor, keeping your garden smelling the way you want.

Similarly, the easily removable top lid with a handle on these worm composting bins makes it easy to feed organic matter into the box while keeping unwanted pests out. As a result, the finished compost is pest-free and ready to boost your gardening efforts.

Looking For More Than Just a Worm Composter?

You can find a vast range of gardening beds and accessories at bluescreenerrorfix. Whether you are growing herbs for your kitchen, flowers for your yard, or vegetables for your table, we have everything you need to create a more efficient and enjoyable gardening experience.

If you’re looking for a worm composter with a raised garden bed, the Worm It All comes with our keyhole raised garden beds. If you’re looking for something else to add to your yard, be sure to check out some of our customer favorites:

Curved landscape edging kits or Straight landscape edging boards to turn your backyard into a verifiable oasis
Our range of 2-tier and 3-tier raised garden beds
Small planters, perfect for the patio

HERE’S A NOTE FROM ANTHONY ON WHY HE DESIGNED THIS PRODUCT:

"The soil in every garden benefits by the lowly earthworm taking up residence; which is why I try to incorporate a Worm Box into my raised garden beds, space permitting. Increase the size of your raised garden bed by adding additional kits which can stack and connect to expand your garden over time? It’ s so easy. No need to move soil – just stack onto your raised garden and fill with more soil or, to increase the length swing out one side board and add additional boards.” – Anthony

Features

Easy to assemble and install
Compost worm access holes
Snap-Lock lid to keep pests out
12 liter capacity
Faster than regular composting
Enrich soil naturally
Recycle organic waste into rich fertilizer
Great for vegetable and flower gardens

Features

(4) Side Panels with Access Holes
(4) Panel Rods
(1) Bottom Board
(1) Top Handle
(1) Lid

Cold Frame For Raised Bed - The 4 x 4 ‘Greenhouse’

2020-09-06T18:14:24-04:00

Vendor: bluescreenerrorfix
Type: Accessories
Price: 54.99

Product Features

Powder-coated steel frame, PVC cover.
Extendable
Simple to remove and replace

Cover With Ease - The Cold Frame for Your Raised Bed

Every season can be prime growing season for any gardener when you cover up your plants in our simple cold frame. We can help give every seedling in your vegetable garden the best chance of life by covering them in our PVC sheeting design that allows for optimal ventilation and insulation, no matter what season you're planning to grow in.

No matter how small or large your vegetable box is, our DIY cold frame stands at 36in. high at the top of the frame to help protect your plants, mulch, or compost. With zippered windows that may be opened for ventilation and are made using a sturdy steel frame that's suitable for any season, so you never have to worry about any hinge rusting or corroding over time.

Build a cold frame to protect everything around your garden today and make sure you've your plants covered throughout the year.

How Does a Cold Frame Greenhouse Work?

Many gardeners use a cold frame to protect their plants from frost in the winter months and extend the growing season for their vegetables, herbs, and plants. You can build a simple cold frame using our kit that provides ventilation on warm days while giving your delicate plants the protection they need to thrive during fall and winter.

Our cold frame is built to control the ambient temperature to look after the plants inside a cold frame, no matter what gardening season it is. With the right protection, your plants will get enough light on warm days without overheating, and won't freeze over the colder months -- it also means that you can grow certain plants out of season with the micro-climate the cold frame creates.

Our kit contains everything you need to put your cold frame up, apart from the raised bed you will need to attach it to.

Why You’ll Love The Cold Frame For Your Raised Bed

Our expandable cold frame is the perfect addition to your garden to help protect tender plants from frost. Whether you want to lock in as much warmth as possible throughout the winter or let in light on the warmer days to keep your plants alive at the end of season, a cold frame gives you much more control.

Regulating the temperature inside, our three feet high cold frames protect your delicate plants and create a secure structure around plants that you can easily open and close depending on the weather.

You can use cold frames to extend your gardening season and grow a variety of plants that normally wouldn't survive in harsher weather conditions, turning your gardening hobby from a warm weather affair, to something you can successfully achieve all year round.

Easy Pairings

The cold frame greenhouse is the perfect partner for our raised garden beds, no matter which size you’re going for:

4 x 4 Raised Garden Bed
4 x 8 Raised Garden Bed
4 x 12 Raised Garden Bed
And lots more of our raised garden beds, corner garden beds, curved garden beds, and terraced garden beds

Interesting Fact

Micro-climates allow you to grow plants that are outside of your growing zone or season. A combination of a cold frame, an insulated raised bed, and a protected location may allow you to create a climate many degrees higher than the outside temperature. Try growing plants that don’t typically thrive in your area. Protect plants that don’t generally over-winter well by placing them in the cold frame until spring. Experiment and save money by growing your vegetables and saving plants that would typically have to be replaced.

Here’s a note from Anthony on why he designed this product:

"I love how our cold-frame greenhouse attaches directly onto my raised bed and enables me to start my plants earlier in the spring. On the opposite side of the season, I’m able to grow well into the fall and during mild New York winters even grow cool season crops like lettuce and spinach!” - Anthony

Kit Includes

Part #1 (4) - Vertical Leg
Part #2 (6) - Horizontal Tube
Part #3 (6) - Bent Tube
Part A (6) - T Connector (3 Hole)
Part H (1) - Center Root Connector
Part J (2) - End Connector
Part K (1) - PVC Cover
Part L (4) - Stake
Part C (2) - T- Connector (4 Hole - Only Use when connecting 2 or more Greenhouses)
Above parts as listed in the Product Manual
RAISED BED NOT INCLUDED

Stack & Extend 'Veggie Wall' - 4 Foot Wide Straight Panels

2020-09-06T16:27:02-04:00

Vendor: bluescreenerrorfix
Type: Accessories
Price: 54.99

The Veggie Wall Kit

Create the perfect growing conditions for vining plants and increase your available growing area by 200%! Make the most of your garden when planting crops like tomatoes, peas, beans, and cucumbers which can take over your garden quickly and become a jumbled mess, leaving your vegetables susceptible to rot, mildew or neglect.

The bluescreenerrorfix Stack & Extend Veggie Wall frame is made from durable stainless-steel and the nylon mesh is strong enough to support heavy fruits and vegetables like beef-steak tomatoes, cucumbers or melons.

Harvesting and plant maintenance are a breeze. No crouching or bending necessary when tending to or picking your plants.

As shown, your Veggie Wall contains two 4ft x 6ft hinged panels providing 48 square feet of trellis area. The hinged panels allow you to use fully extended to a width of 8 feet, or angle on a corner. With multiple kits you can stack an additional 6ft high for a total height of 12ft, or extend the width in 8-foot increments.

The Veggie Wall can also be used to create privacy screening. In many newer townhome or subdivision complexes there is little to no fencing to create a sense of your own private space. Enjoy backyard entertaining this summer without feeling like the whole neighborhood is watching you. For this application, fast-growing flowering vines like clematis, morning glory, or scarlet runner bean will create coverage (and beautiful flowers) in no time.

Efficiency with Watering

Did you know? Vertical gardening makes it easier to water your plants properly (and potentially less often). Since your plants are not sprawled on the ground, the water you supply will go directly into the soil, rather than sitting on top of the leaves (potentially scalding them), before the water ever reaches the roots. Keeping water off your vegetables is also important to prevent rot and diseases like powdery mildew.

Easy to disassemble and store if you choose to remove during the fall and winter months.

The bluescreenerrorfix system of modular raised garden beds, borders, sandboxes and accessories was designed by our founder, Anthony Topping. As a professional landscape designer who spent many years creating high-end gardens in the Tri-State New York area, he felt there had to be a way to give homeowners the ability to easily create quality landscaping features and gardens for much less than paying a professional.

Here’s a note from Anthony on why he designed this product:

“The Veggie Wall was actually my first product design concept – even before the modular raised beds. I was inspired by Mel Bartholomew’s ‘Square Foot Gardening’ method and wanted a product that would help people grow more food in less space - vertically. After designing our patented raised bed garden brackets, I realized I wanted the vertical garden to integrate with our raised beds and other accessories like the Animal Barrier and also have the same stack and extend function as our modular beds - which led to the product we have today. A system that makes the best use of a garden space and can integrate with the Animal Barrier to keep animals out of my prized crops!” - Anthony

Features

Durable stainless-steel and nylon construction.
Elevated design allows easier plant care with less bending.
Increases airflow to reduce the chance of disease and increases access to sunlight for faster growth.
Connects to anchor or stacking joints in bluescreenerrorfix raised garden beds. For other applications, stake directly into the ground.
Stackable and Extendable
One-year warranty

Kit Includes

Part # 1 (3) - Stake (**Use Stakes only if you install veggie wall directly in the ground)
Part # 2 (3) - Adapter Caps
Part # 3 (2) - Cotter Pin
Part # 4 (2) - L Connector
Part # 5 (3) - T connector
Part # 6 (3) - Connector Caps
Part # 7 (3) - Lower tube
Part # 8 (3) - Middle tube
Part # 9 (3) - Upper tube
Part # 10 (2) - Long Tube
Part # 11 (1) - Cross Brace
Part # 12 (1) - Net
Part # 13 (28) - Tie
Above parts as listed in the Product Manual
RAISED BED NOT INCLUDED

Stack & Extend 'Animal Barrier' with Gate - 4 Foot Wide Straight Panels

2020-09-06T12:46:04-04:00

Vendor: bluescreenerrorfix
Type: Accessories
Price: 64.99

Product Features

Connects to anchor or stacking joints in bluescreenerrorfix 4' raised garden beds (for other applications, stake directly into the ground)
Durable plastic and stainless-steel construction
Keeps out small to large sized animals
Gate allows for easier access than traditional animal fencing
Constructed from stainless steel uprights and heavy-duty netting
Will not harm pets or wildlife
Integrates with bluescreenerrorfix Veggie Wall
Easy to install
1-year warranty

The Stack & Extend Animal barrier Kit

The bluescreenerrorfix Animal Barrier creates a customizable, animal-proof protection zone for your fruits and vegetables. Traditional deer fencing (or garden netting) looks unsightly and does not allow easy access to your plants. It rarely lasts more than one season, requiring the purchase of replacement bamboo stakes and fabric netting that will deteriorate in the elements.

This is one of the more popular accessories for our composite raised garden beds and has a 1-year warranty. The gated stainless-steel frame and heavy-duty rigid plastic mesh is built to last and won’t flop, rust or rot. The easy-access gate makes it simple to tend to your garden without leaning or reaching.

As shown, the bluescreenerrorfix Stack & Extend Animal Barrier kit will protect a 4ft. x 4ft. garden to a height of 2 feet. Small animals like rabbits, cats and dogs are easily deterred at the 2-foot height. Purchase multiple kits to expand the protection to any dimension, or stack to any height.

On a recent trip to the Pacific Northwest we noticed in many neighborhoods that people are planting vegetables in their front yard because often, large evergreen trees in the back of their property prevent enough sunlight from reaching sun-loving plants like tomatoes, cucumbers, peppers, peas, beans and corn.

If they want to grow more than just salad greens, it’s become necessary for many to take their gardens into public spaces. Backyards are often fenced, but the front yard is an open invitation for animals to saddle up to the buffet. Our Animal Barrier’s sturdy design and premium materials will allow you to protect your garden while maintaining your home curb appeal.

With multiple animal barrier kits, your options (and benefits) are endless. Stack them high to grow tomatoes or corn, and you’ll also enjoy the additional support our rigid frame provides for your tall (and top-heavy) plants. Next season, if you want to plant a low-growing crop like strawberries, you’ll have several kits to use to extend for a long row of berries. The stable frame will allow you to easily connect bird netting over the top to keep out birds too.

Avoid damage from deer

Did you know? In a single night deer can destroy your carefully tended garden, ravaging months of hard work in your vegetable and flower beds.

Experts agree that the most effective method of deterring deer is to enclose your yard with a tall barrier; though even with traditional deer fencing around the perimeter of your yard, you cannot prevent deer from leaping over it and landing safely on the other side.

Deer are well known to avoid jumping into a tight enclosed space and so by protecting only the plants you need with an animal barrier, it is measurably less likely that deer will attempt to jump into the enclosure.

Here’s a note from Anthony on why he designed this product:

“Options for deterring animals are often flimsy and unsightly. I wanted to create a strong and sturdy product that would fit neatly around the area you want to protect. The bluescreenerrorfix animal barrier provides the homeowner with the flexibility to increase the barrier’s height or extend the animal barrier as needed, to protect their plants and to deter animals in their garden. Since the animal barrier attaches to the raised bed you don’t have to deal with the problem of weeds and grasses growing through the netting, making mowing and maintenance difficult. Finally, after watching my own mother struggle to enter her garden through traditional netting, I knew it was very important to include an easy-access gate for the animal barrier to make it easy and safe to tend your garden.” – Anthony

Kit Includes

Part #1 (2) - Corner upper hinge connector - Top
Part #2 (4) - Corner upper hinge connector - Bottom
Part #3 (1) - Upper gate hinge connector - Top
Part #4 (1) - Upper gate hinge connector - Bottom
Part #5 (2) - Upper gate hinge connector - Sleeve
Part #6 (1) - Lower gate hinge connector - Top
Part #7 (1) - Lower gate hinge connector - Bottom
Part #8 (1) - Lower gate hinge connector - Sleeve
Part #9 (4) - L square connector
Part #10 (1) - Gate latch
Part #11 (2) - Gate stopper screw
Part #12 (1) - Gate stopper
Part #13 (4) - Tube cap
Part #14 (50) - Zip ties
Part #15 (1) - Long netting
Part #16 (2) - Square netting
Part #17 (2) - Vertical square gate tube
Part #18 (4) - Horizontal square gate tube
Part #19 (3) - Upright horizontal tube
Part #20 (4) - Vertical round tube
Part #21 (4) - Raised garden bed 2'' brown adapter snap caps, (4) Raised garden bed 1'' black adapter snap caps
Part #22 (1) - Double Stack Gate Spacer/Round Sleeve (Use this part only if stacking 2 or more kits)