Our Geotextile Underlayment Fabric consists of non woven Polypropolyne stable fibers which are heat set and needle punched for superior bonding. This extremely versatile underlayment fabric has a very high tensile strength. The geofabric underlay has great physical and hydraulic properties and is used for many commercial and consumer applications.

PRODUCT DETAILS

Material: Non-Woven stable Polypropolyene Fiber Filaments bonded by heatset and needle punched

Resist: Tears, punctures, soil chemicals

Features: Extreme tolerance of Hydrocarbons, Freeze-thaw cycles, mildew, and rot

PRODUCT SPECIFICATIONS

Tensile Strength (lbs.): 90

Mullen Burst (psi): 185

Puncture Strength (lbs.): 60

Water Flow Rate (g/m/sf): 150

USES FOR NON WOVEN GEOTEXTILE FABRIC

Pond Installation

Non Woven Geotextile pond underlay increases the puncture resistance of 45 Mil EPDM pond liner by 400%.

Pond Liner Underlayment

Rock and Boulder Padding

Landscape

Heavy Duty commercial landscape fabric that keeps weeds out but allows water to pass through.

Garden and Commercial Landscape Fabric

Heavy Duty Weed barrier

Drainage Fabric

Designed for easy flow of water but with superior soil stabilization

Filter Fabric

Under Drain Fabric & Trench Drains

Farm & Cattle

Recommended by the NRCS for separation and drainage as an inexpensive and effective soil stabilizer

Cattle crossing carpet and Gravel or dirt access roads

Feeding Troughs, Feedlots & Watering Ramps

Erosion Control

Recommended by the NRCS for shoreline erosion prevention and repair

Shoreline erosion

Slope and Soil erosion

Separation Fabric

A medium weight underlayment for soil separation and stabilization in paving and gravel applications

Walkway, driveway, patio under paver

Roadwork and Asphalt overlayment prep

DESIGN YOU OWN WATER GARDEN!

The Design it All online tool allows you to build out your custom water feature design and automatically calculate the necessary liner size, pump, and volume! Build your dream design today and take the guess work out of pond building!

Screw-Type Components

The Frame it All composite boards are made with a hollow profile. This design choice was made to trap air, thus acting as a layer of insulation for the soil in your raised garden bed. The brackets and boards connect without the use of any tools. Just use snap-lock plugs to lock them in place. If you’re installing your raised garden bed directly into the ground the only tool you will need is a hammer to drive in the stakes. Our anchor joint packs include anchor stakes which are only meant to be installed into the ground level of your garden bed or landscape edging. Our stacking joint packs include stacking stakes which can also be used for the ground level of a build but can also stack into other stakes allowing you to increase the height of your design. For cross board installation, you will need our 3-way/4-way brackets. Each pack stacking or anchor joints will have enough hardware to connect 2 boards and each 4-way bracket pack will have enough hardware to install 1 cross board.

If you’re looking to find parts for a landscape edging, playground border, raised garden bed, sandbox, or water garden then you’re in the right place. The Frame it All modular board and bracket system uses the same boards for all these applications.

Design it all

It can be difficult to know exactly what parts to purchase when making your own design from scratch. To make it easier, we’ve introduced Design it All, our 3D design tool. With this tool you can customize your own garden bed, edging, or water garden by stacking and connecting boards in the 3D designer. While you build you can check the part list in the top right of the tool. Once you’ve finished your design you can also send the part list directly to checkout so you can be confident with what you’re ordering.

Here’s a note from Anthony on why he designed this product:

“I wanted a one-inch product as a lower priced option for our customers, but it had to deliver the quality and longevity I expected. I came up with the concave/convex profile of the boards so that the boards (when stacked) would interlock and not be susceptible to bowing or shifting over time.” - Anthony

Warranty Information & Registration

Learn more about our Warranties >>

Weathered Wood 2" Profile

Design your own garden bed one board at a time! All components of the same profile will connect so you can have a garden with both straight and curved boards! If you’re installing a landscaping or playground edging, use our anchor joint packs for the ground level. If you’re looking to stack boards higher, use our stacking joint packs. Each stacking or anchor joint pack come with enough brackets and stakes to connect 2 boards together. If you’re looking to put support cross boards on your design, or just doing a custom design, you can use our 3-way/4-way bracket pack. Each 4-way bracket pack comes with enough hardware to install 1 cross board. If you have any questions on what to expect with each component purchase just send your questions to [email protected] and one of our garden experts will get back to you with the answer you’re looking for.

All our composite boards are made with a combination of recycled plastic and sustainable hardwood fibers. These boards can be used in any Frame it All application such as sandboxes, edging, playground borders, water gardens, and raised garden beds.

Design a custom garden

If you’re unsure how many components you’ll need for your design try out our 3D design app, Design it All . With this tool you can build your design from your computer and once you’re all done you can export it directly to check out, so you don’t need to guess on parts. We recommend installing cross boards on level 2 for a 2-level design, 1 & 3 for a 3-level design, and 2 & 4 for a 4-level design.

Here’s a note from Anthony on why he designed this product:

“Weathered Wood 2” is our newest profile release to celebrate 25 years in business. We decided for this profile we would introduce gray brackets to match the boards. This way, if you don’t like the way the black brackets look on the Weathered Wood 1” profile, you have an option for a 1-tone edging or raised garden bed.” - Anthony

Warranty Information & Registration

Learn more about our Warranties >>

Uptown Brown 1" profile

Every 4ft Uptown Brown board is made with the equivalent of 78 recycled water bottles. The boards are made with a combination of recycled shampoo bottles and milk jugs but putting the amount of plastic in the form of water bottles is much easier to visualize because we’ve all seen them. In just a 4’ x 8’ x 11” garden, 1014 plastic water bottles were diverted from the ocean! The other component of our composite boards are the sustainable hardwood fibers that are mixed in for strength and texture.

Which joint pack do i need?

Our different joint packs can be confusing if you haven’t used them before so here’s a quick breakdown of what each pack is used for. Our Stacking brackets come with stacking stakes. These stakes can be used on the ground level of a garden bed however their main purpose is to stack additional levels on garden beds and landscape edgings. Our anchor joints come with the same hardware as our stacking joint packs however instead of stacking stakes they come with anchor stakes. Anchor stakes are used for the ground level of raised garden designs and landscape edgings for additional support, although they are not required for every raised garden bed design. Our 4-way bracket packs are used to make 3-way and 4-way connections and are most used to install cross boards for garden bed support. Each 4-way pack has enough hardware to install 1 cross board and each anchor/stacking joint pack has enough hardware to bracket and connect 2 boards.

take the guess work out of ordering

The math behind knowing exactly how many joint packs and boards you need can become complicated fast! To help you out with that process, we release Design it All, our 3D design app. Design it All is a desktop tool that enables you to customize a garden bed or landscape edging just by dragging and connecting boards on your computer. Once you have your design made, you can export the full part list to checkout. No more guessing on whether you’re getting enough parts!

Here’s a note from Anthony on why he designed this product:

“Uptown Brown is our answer to a traditional brown color option for our raised garden beds and edgings. The two-tone black and brown combination of the boards and brackets emphasizes your garden and edging wonderfully. This has definitely been one of my favorite color options that we’ve release over the years as it matches a lot of wood tones and patios.” - Anthony

Warranty Information & Registration

Learn more about our Warranties >>

Weathered Wood 1" Profile

Our Weathered Wood brackets and non-additional components are shared with the Uptown Brown 1” profile. Both color options use the same bracket type so they can be used interchangeably. Each joint pack comes with enough brackets, stakes, caps, and snap-lock plugs to connect 2 boards together. The only difference between our stacking joint pack and anchor joint pack is the type of stake included. The anchor joint pack will come with 2 anchor stakes. These stakes are designed to be driven into the ground for additional support and cannot be used to stack. Alternatively, our stacking joint pack will come with 2 stacking stakes that can either be used on the ground level, in cases where cross boards are used, and to stack additional levels on a garden bed or landscape edging. The finishing sleeves are used only for landscape edging and playground border applications. These sleeves are an aesthetic addition at the ending of an edging segment to cover the portion of exposed stake.

Our composite boards are made with a hollow profile for two reasons. First, this design makes the boards lightweight so anyone can assemble their own raised garden bed or edging. Second, this hollow design traps air and that air acts as an excellent barrier of insulation. With this insulation, you soil will stay warmer during the cool season months and cooler during the extremes of the spring and summer months.

Customize your own garden from scratch

Try out our 3D design tool, Design it All if you’re unsure about what to purchase for your garden idea. You can drag, drop, & stack boards to build out your own custom garden design. You can also turn on the grid option that will allow you to see exactly how many square feet your garden will have. And the best part is once you’re satisfied with your design, you can export the full part list directly to checkout and have everything you need to build your design immediately.

Here’s a note from Anthony on why he designed this product:

“Our Weathered Wood option was released to give an alternative to our original Classic Sienna. After consulting color experts we landed on Weathered Wood as another color option. It matches great with a lot of house colors and works beautifully as a landscape or playground border color. For raised garden bed applications it blends in easily with stone while still remaining emphasized on green grass” - Anthony

Warranty Information & Registration

Learn more about our Warranties >>

Classic Sienna 2" profile

Create the raised garden bed design of your dreams using bluescreenerrorfix composite boards and stacking brackets. Designs made from straight and curved boards can feel both formal and functional. Neat and tidy rows of raised beds help control the chaos and make it easy to maintain your garden. The open-channel design of our raised garden bed boards insulates the soil in your raised garden bed. Soil stays warmer in the early Spring and Fall, and cooler in the Summer. Regulated soil temperature allows you to grow earlier and longer into the season, and assists plants in growing stronger and healthier, with more yield. Boards are 44.5 inches long, creating a 48-inch span, (once brackets are attached) and 5.5 inches high. 2 inch thick boards feature a flat profile edge for extra durability and stack evenly to higher levels.

When creating your own designs, keep in mind you may need some specialized accessories. When creating straight runs of boards that don’t connect in a loop, you may want to purchase finishing sleeves to create a professional finish. When your design requires 3 or 4 boards to intersect, you will want to purchase our 4-way bracing bracket.

Did you know? bluescreenerrorfix boards and brackets are also great for creating landscape edging, playground borders and other unique landscaping features like mailbox planters. 

The bluescreenerrorfix system of modular raised garden beds, borders, sandboxes and accessories was designed by our founder, Anthony Topping. As a professional landscape designer who spent many years creating high-end gardens in the Tri-State New York area, he felt there had to be a way to give homeowners the ability to easily create quality landscaping features and gardens for much less than paying a professional.

Here’s a note from Anthony on why he designed this product:

“I like the strength that the double-rib I-beam provides to our 2-inch boards. What I really like is the increased insulation factor of the open channel design, making our boards the best raised garden bed insulator on the market. Why is this important? Insulation regulates the soil temperature, which enables you to grow longer into the fall, and plant earlier in the Spring…especially if you include a bluescreenerrorfix cold frame greenhouse.” - Anthony

Warranty Information & Registration

Learn more about our Warranties >>

Classic Sienna 1" Profile

The Frame it All composite boards are made with a hollow profile. This design choice was made to trap air, thus acting as a layer of insulation for the soil in your raised garden bed. The brackets and boards connect without the use of any tools. Just use snap-lock plugs to lock them in place. If you’re installing your raised garden bed directly into the ground the only tool you will need is a hammer to drive in the stakes. Our anchor joint packs include anchor stakes which are only meant to be installed into the ground level of your garden bed or landscape edging. Our stacking joint packs include stacking stakes which can also be used for the ground level of a build but can also stack into other stakes allowing you to increase the height of your design. For cross board installation, you will need our 3-way/4-way brackets. Each pack stacking or anchor joints will have enough hardware to connect 2 boards and each 4-way bracket pack will have enough hardware to install 1 cross board.

If you’re looking to find parts for a landscape edging, playground border, raised garden bed, sandbox, or water garden then you’re in the right place. The Frame it All modular board and bracket system uses the same boards for all these applications.

Design it all

It can be difficult to know exactly what parts to purchase when making your own design from scratch. To make it easier, we’ve introduced Design it All, our 3D design tool. With this tool you can customize your own garden bed, edging, or water garden by stacking and connecting boards in the 3D designer. While you build you can check the part list in the top right of the tool. Once you’ve finished your design you can also send the part list directly to checkout so you can be confident with what you’re ordering.

Here’s a note from Anthony on why he designed this product:

“I wanted a one-inch product as a lower priced option for our customers, but it had to deliver the quality and longevity I expected. I came up with the concave/convex profile of the boards so that the boards (when stacked) would interlock and not be susceptible to bowing or shifting over time.” - Anthony

Warranty Information & Registration

Learn more about our Warranties >>